Description:
Ceramic sintering push plate kiln is a new type of push plate kiln developed by the company in recent years, which is energy-saving, efficient and highly automated.The furnace body is fabricated in sections.Each hearth is equipped with a walking wheel and propeller,The furnace body and the discharge roller table are mounted on the track in turn and bolted together as a whole.
The main technical parameters:
Type |
Furnace Size (L×W×H)mm |
Equipment Size (L×W×H)mm |
(KW) Installed Power |
Number of Temperature Control Group (Temperature Area)
|
Common Operating Temperature (℃) |
Heating Element |
TZL-100-13 |
9000×250 ×180×2 |
12000×2000× 1650 |
100 |
3 |
1300 |
Silicon Carbide
|
TZL-150-13 |
12000×400 ×155×2 |
15000×1600× 2000 |
150 |
8 |
1300 |
Silicon Carbide
|
TZL-160-13 |
13000×400 ×290×2 |
17000×2100× 1700 |
160 |
6 |
1300 |
Silicon Carbide
|
TZL-200-13 |
18000×320 ×180×2 |
21000×1500× 2000 |
200 |
9 |
1300 |
Silicon Carbide
|
TZL-250-11 |
16000×440×250×2 |
20000×3800× 1600 |
250 |
8 |
1100 |
Resistance Wire |
It can be specially designed according to users’ requirements
Operate temperature: 100 ℃~1400 ℃
Features:
1. The equipment transmission is smooth;
2. Atmosphere control of high accuracy, light, energy saving, can be assembled on-site, multi-temperature continuous temperature control;
3.Furnace refractory lining a new light, small furnace heat loss;
4.All controlled equipment and a security alarm protection device, and further guarantee the safe operation of system characteristics.
Usage:
The calcination of PTC, rare earth, ceramics, thermal ceramic components, magnetic materials, aluminum oxide, electronic ceramics and other products.
Same directional:
There is no limit to the process of the product with big yield. Reverse direction: it has more energy efficient than in the same direction (uses the waste heat from the discharge end of hole to heat the feed end of the other hole), but it has a relatively high require on the process graphs of product (process graphs must be relatively stable).
Our company:
yixing City Wanxin Furnace Co., Ltd was found in 2000, located in famous Southern city of Yixing which is known as the "Pottery City" reputation, is the manufacturer of Scale production of the series laboratory furnace and industrial furnace in Eastern China.The company mainly products electric kilns and gas kilns (push board kiln, roller kiln, mesh belt furnace, car kiln, pit furnace, box furnace, vertical furnaces, lift furnaces, laboratory furnaces and so on) in the range of 100 ℃~1700 ℃. It is mainly used for electronic ceramics, PTC, lithium batteries, fluorescent, magnetic materials, piezoresistor, ceramic capacitors, rare earth, electronic powder, chemical powders, metal thermal processor and so on.
The company has strict quality management system and perfect after-sales service system.
http://www.yxwxly.com/